FLUSTER DIRECTIONS:
1. Select the proper flash file(s).
2. You must select "Repartition" if you have PIT file selected.
3. If necessary, examine the flashing options (Repartition, EFS clear, Boot update).
4. Turn on the phone in download mode (turn it off, then press and hold power, home, and volume
down).
5. Install drivers on the PC if necessary and connect the phone using a USB cable.
6. Click the "Flash" button.
STORAGE DIRECTIONS:
A rooted phone is required!
You must manually root your device if the software is unable to do it automatically.
1. Turn the phone on.
2. Toggle "Developer options" in "Settings" - "About phone" by tapping "Build number" seven times. Then, go to "Settings" - "Developer options" and turn "USB debugging" on.
3. Plug in the phone's USB cable to the computer and install any necessary drivers.
4. In the ADB settings, choose a device.
5. Click "Write EFS" to restore or "Read EFS" to read the backup.
Phone diagnostic port must be turned on in order to backup and restore QCN.
1. Turn the phone on.
2. Enter "DM+MODEM+ADB" by typing *#0808#.
3. Select "DM/DUN over HSIC" by typing *#9090#.
4. Install drivers on the PC if necessary and connect the phone using a USB cord.
5. In the port settings, select the diagnostic port.
6. Click the "Read QCN" or "Write QCN" buttons to read an NV backup or to restore.
UNLOCK GUIDELINES:
USB micro-cable:
The phone needs to be turned on.
2. Enter "DM+MODEM+ADB" by typing *#0808#.
3. Select USB (or "DM/DUN over HSIC") after entering *#9090#.
Restart your phone.
5. Connect the USB cable and install any necessary drivers.
6. In the port settings, choose the Samsung diagnostic port.
7. To unlock directly, use the "Unlock" button.
REPAIR GUIDELINES:
IMEI, serial, BT, WiFi, and product code repair:
1. Turn the phone on.
2. Choose "DM+MODEM+ADB" after entering *#0808#.
3. Restart the phone.
4. Plug in the USB cable and install any necessary drivers.
5. In the port settings, choose the Samsung diagnostic port.
6. Click "Reset MSL" to turn off security.
7. Await the phone to restart.
8. Enter "Settings"-"Developer options" and enable "USB debugging" after tapping "Build number"
seven times in "About phone" to activate "Developer options."
9. In the ADB settings, choose a device.
10. Enter the values that require repair.
11. Select the "Repair" option.
Disable Factory Mode and Reset EFS: The phone needs to be rooted!
Should the software be unable to root the phone on its own, you will need to manually root your device.
1. Turn the phone on.
2. To enable "Developer options," tap "Build number" seven times in "Settings"-"About phone." Then,
select "USB debugging" from "Settings"-"Developer options."
3. Use a USB cable to connect the phone to the PC, and install any necessary drivers.
4. In the ADB settings, choose a device.
5. Click "Reset EFS" to reset it if necessary.
Take caution; don't do this unless absolutely necessary. There will be an automatic backup created.
6. Click the "Disable Factory Mode" button if a yellow table is visible on your device's screen.
Try wiping EFS/NVM if you're seeing "IMEI null/null" or "Phone baseband unknown" errors.
Post a Comment